olcowhand's latest activity

  • olcowhand
    olcowhand replied to the thread MF 1450.
    I'm a little slow as that never occurred to my brainfarting mind!
  • olcowhand
    olcowhand replied to the thread MF 1450.
    Good stuff! Have a tube in my little HF toolbox!
    • 17586586050313613646820643279812.jpg
  • olcowhand
    olcowhand reacted to MNGB's post in the thread MF 1450 with Like Like.
    Generally you will get about 60 PSI on a good engine with ACR, I'm with Chris try the loctite 660, I'll say the reason for no...
  • olcowhand
    olcowhand replied to the thread MF 1450.
    Yes, gotta find out that before worries about the crank. But that Loctite 660 will work! If engine can be revived, after tightening...
  • olcowhand
    olcowhand reacted to Toomanytoys84's post in the thread MF 1450 with Like Like.
    Did I miss something about why the loss of compression occurred?
  • olcowhand
    olcowhand reacted to Cvans's post in the thread MF 1450 with Like Like.
    With nothing to loose I'd take a file to the crank and knock off the high spots. Get a new key and some of this "Product Description...
  • olcowhand
    olcowhand reacted to TAHOE's post in the thread MF 1450 with Like Like.
    I was thinking the flywheel could be saved by cutting a larger keyway, but that crank is probably not salvagable, I imagine the inside...
  • olcowhand
    olcowhand reacted to Propane1's post in the thread MF 1450 with Like Like.
    Goop is a better choice. Just my 1 cents worth.
  • olcowhand
    olcowhand reacted to MFDAC's post in the thread MF 1450 with Like Like.
    Thanks for the thought, Ted! DAC
  • olcowhand
    olcowhand reacted to esbbent's post in the thread MF 1450 with Like Like.
    DAC, If I had a spare 14 hp crankshaft I would send it to you. I have more 10 and 12 hp K series parts sitting around than 14 hp at...
  • olcowhand
    olcowhand reacted to MFDAC's post in the thread MF 1450 with Like Like.
    You don't know what I'm gonna say, Noel---LOL! I have been considering that, just using JB weld or Loctite and throwing it all back...
  • olcowhand
    olcowhand reacted to Propane1's post in the thread MF 1450 with Like Like.
    Ya, I’d get a key for it and put it back together. And I’d put some Goop on all the surfaces. And on the treads of the bolt, and a...
  • olcowhand
    olcowhand reacted to MFDAC's post in the thread MF 1450 with Sad Sad.
    Well guys the engine came out and it is a sheared flywheel key, but the crank and flywheel are badly galled up. I was looking at it this...
  • olcowhand
    olcowhand reacted to Cvans's post in the thread MF 1450 with Like Like.
    You lost me here Daniel. Haven't run across ACR before.
  • olcowhand
    olcowhand reacted to esbbent's post in the thread MF 1450 with Like Like.
    Auto compression release to make starting easier. It lifts the exhaust valve up slightly. This shows part of it (pins and a spring)...
Show older items
Back
Top