Search results

I stand corrected, just found a image of the same plow, it's for a John Deere M and MT. I have never seen one of these plows for that model. The most I have seen are for the larger two cylinders.

Most Deere tractor mounted two way plows I've seen had a plow bottom behind each rear wheel, not central behind the tractor. The one in the picture looks like the plows pivot on one central bar.

Doesn't

1/8 front to rear. You using the Deere leveling gauge? You measure off the middle blade for front to rear measurement.

Especially if the steering is a little loose!:oops:

Deere 420, 10 mph in high range, according to TD. Having one, I will say it's pretty fast for a GT.

The K321 and K341 tend to shake pretty good at low idle, especially the K341. You can adjust the small screw on the throttle butterfly and bump the idle up to smooth the shakes out.

Doug, you could also move the spring on the other end, also your throttle cable.

Makes me glad this monster has power steering.

Doug, as far as I know, any Kohler engine painted flat gray is a replacement engine, at least in JD machines. My 314 has one.

5x5, five feet or five minutes, whichever comes first. Worked for the military ;)

I bet the cap is under the roof.

Two things with the JD blower, either get a tall chute (there's a Ariens snow blower one thats a direct fit), or a round chute off a older JD blower. Another thing is putting a smaller belt pulley or auger sprocket on it. The blower on my 316K has the older round chute and two less teeth on the...

Four link chains and ag tires don't tend to mix well, on my ag tired machines I use two link chains.

Poptry, nothing country about it anymore.

Yep, still at Blairstown. And for Doug, I got over twenty years off and on operating heavy equipment, so I got a few skill's up my sleeves.

A little history on me, I've been a green and yellow fanatic pretty much since I could walk. As a kid I had JD 1/16 scale farm toys, and my dad worked on a dairy farm that ran a A, 620, and 630. As I got older I went from 1/16 scale toys to 1/64 ( cheaper and they take up less room!) Got my...

That's ok Noel, I'm sure you have a few others that would stump me for awhile. JD's are easy for me, I own eleven and work at a dealership.:thumbs:

That wouldn't be a once a year conference dealing with water, would it Doug? I attended one in Pierre when I worked for the water dept. Basically walked around for three days listening to seminars, seeing what vendors had, and munching food off and on. There was some awards ceremony at the end.

The gaskets may be a update or upgrade Doug.