Search results

I've

I've always put the filter before the pump, this way if there is any junk in the tank, it gets caught in the filter first, instead of the pump.

All your lift linkages are attached to the lift handle, and speaking of, you might want to check underneath the tractor if you take the deck off. Deere came out with a helper spring for the hand lift. If your tractor has it, you'll appreciate it with that tiller. When the time comes and you need...

I meant single clutch, some 110's and 112's have a single clutch/brake pedal, others have one clutch pedal and a brake pedal on the other side.. With the tractor having a blade and a tiller coming with it, which means you got both the front and rear lift linkages. Both were extra parts that had...

Also, you might want to check and see if the previous owners of that 110 have the mule drive for that tiller, Doug. There's a set of two pulleys that go under he middle of the tractor, one belt comes off the engine and goes to the mule drive, a second belt goes from the mule drive, then gets...

Looks like a 8hp 110, with the dingle clutch / brake pedal. I see you also got a 43 blade for it too.

Massey also used rebadged Oliver 99's during the same time. Kind of a foreshadowing for the AGCO company of today.

New(er) Honda push mowers use a plastic deck. I have one, nice and light weight.

If you ho o If you go over it just like you do with the older tractors, it'll last. I've seen ones come in that look like they been in a demo derby.

Steering ki Kind of reminds me of the old Case CC, DC, SC and V series with the "fence cutter" or "chicken roost" steering.

Figures, they probably just uncrated it, put the steering wheel and seat springs on, and shipped it.

Did he get it through a dealership? If so, the dealer should have set it up. Although there are a few that come through our shop that were purchased at other dealerships and not set up..

At the dealership we put 10 psi in the rear and 15 psi in the front, and then level the deck.

K241 and up are a larger diameter

Was thinking the same, looks like a D8K model.

Hmm, getting a sudden urge to line up my herd this weekend, ;)

Governor setup is very similar to a Onan, but works in the vertical plane. As long as you disassemble it bottom up, you should have no issues with things flying out. Like Daniel said, it looks like maybe one or more of the "fingers" on the governor spider may have broken. There should be no...

I work on both, so I know the differences quite well. Kenny, if I remember tomorrow, I'll check out some info on that engine when I'm at work.

X304 uses a newer V twin, the one from the 160 is a single cylinder, and about 5 horsepower less.

The two dealerships I work(ed) at pay the tech's by the hour, not by the % of the bill, not sure about your area. When I make out a estimate, I start with what I think the machine needs to run and perform it's job. That is the base estimate, I then figure in any cosmetic and or additional minor...