Search results

My uncle had a SS12 and still has a SS14, both had the same rear tires as yours and both did full garden duties, from plowing to planting.

Orange and green? The only Ag related companies that I can think of that used those colors are Allis Chalmers and New Idea. Allis used green early on, then went to Persian orange.

They are about the same as the comparable sized Briggs and Kohlers. There are few of those late eighties to mid nineties 100 series floating around my area. My uncle and I got one thrown in on a deal with a 214. Came with the deck and snowblower, sans mule drive for the blower. It's too light...

To me, this is the point where JD started going down hill, stamped frames, vertical shaft motors. belt driven cheap hydrostatic transmissions, etc If you were closer Doug I would GIVE you a working twin of that tractor, with the mower deck and 95% snowblower.

The two way plows for the A, B and H would have the plow beams go between the rear wheels and the diff. You would drop one bottom and plow in one direction, when you got to the end you would lift that bottom up and then turn the tractor around. When you were facing the other direction, you would...

I stand corrected, just found a image of the same plow, it's for a John Deere M and MT. I have never seen one of these plows for that model. The most I have seen are for the larger two cylinders.

Most Deere tractor mounted two way plows I've seen had a plow bottom behind each rear wheel, not central behind the tractor. The one in the picture looks like the plows pivot on one central bar.

Doesn't

1/8 front to rear. You using the Deere leveling gauge? You measure off the middle blade for front to rear measurement.

Especially if the steering is a little loose!:oops:

Deere 420, 10 mph in high range, according to TD. Having one, I will say it's pretty fast for a GT.

The K321 and K341 tend to shake pretty good at low idle, especially the K341. You can adjust the small screw on the throttle butterfly and bump the idle up to smooth the shakes out.

Doug, you could also move the spring on the other end, also your throttle cable.

Makes me glad this monster has power steering.

Doug, as far as I know, any Kohler engine painted flat gray is a replacement engine, at least in JD machines. My 314 has one.

5x5, five feet or five minutes, whichever comes first. Worked for the military ;)

I bet the cap is under the roof.

Two things with the JD blower, either get a tall chute (there's a Ariens snow blower one thats a direct fit), or a round chute off a older JD blower. Another thing is putting a smaller belt pulley or auger sprocket on it. The blower on my 316K has the older round chute and two less teeth on the...

Four link chains and ag tires don't tend to mix well, on my ag tired machines I use two link chains.

Poptry, nothing country about it anymore.