Belt information needed. X300 JD

[Propane1]

My Son is looking for information on belt sizes or part numbers.

To new of tractor for me to know anything about.
How many belts are on them.
And where would I find belt lengths or part numbers.
Thanks.

Noel

 

[Sawdust]

Watch this video it should help. I found the belt he is using on VBelt Supply but they must be two different sizes. It looks like just one belt.

 

[KennyP]

Gonna need more info as there are several different decks for this .

https://partscatalog.deere.com/jdrc/navigation/equipment/61166

 

[Sawdust]

The 300 only has the 38” and the 42” deck and the 320 has the 48” according to Tractor Data.

TractorData.com John Deere X300 tractor attachments information

www.tractordata.com

 

[KennyP]

The 300 only has the 38” and the 42” deck and the 320 has the 48” according to Tractor Data.

TractorData.com John Deere X300 tractor attachments information

www.tractordata.com

I still see 2 different 38" deck and 3 42" deck parts pages!

 

[Sawdust]

I still see 2 different 38" deck and 3 42" deck parts pages!

The only difference is one has a tensioner handle and the other one doesn’t. Noel should be able to look at that to determine which one he has.

 

[Propane1]

I’ll have to find out. Thanks guys.

Noel

 

[Propane1]

Little more info. It’s a 42 inch deck with button on dash to turn the deck on.

Noel

 

[KennyP]

All 3 of the 42" decks listed by JD use the same belt, M154621. Length is 3714.6mm, thickness: 11.4mm and width is 14.21mm. Hope this helps.

 

[Propane1]

Serial number. It that’s any help. Thanks Kenny. I’ll pass the info along.

Noel

 

[Sawdust]

All 3 of the 42" decks listed by JD use the same belt, M154621. Length is 3714.6mm, thickness: 11.4mm and width is 14.21mm. Hope this helps.

Exactly what I posted earlier he just needed to determine if it was a 42 or 38 deck.

 

[Sawdust]

Little more info. It’s a 42 inch deck with button on dash to turn the deck on.

Noel

Noel not sure how much your shipping would be but the VBelt Supply has been hard to beat for a quality Kevlar belt.

 

[KennyP]

Exactly what I posted earlier he just needed to determine if it was a 42 or 38 deck.

True, but still needed to know which one it was. I won't look up parts if there are many options. Too much info to have to transfer back here. Get the correct info to start with and it's easy to find the right part.