Case Manuals?? 444

Glgrumpy

Glgrumpy

Well-Known Member
Member
Just bought a Case 444 and want parts and owner's mans and maybe repair if available. Tractor talk used to have those to print, that done here? I'm not seeing how to go to if anything. Even the old site is different now and was having issues going to site properly to look at. I found Owner's yet wasn[t seeing how to look at it? OR, if anyone has printed books to sell, let me know.
 
MNGB thanks for help. I did look at and print the mower and sleeve hitch manuals. I guess I have that sleeve hitch on tractor. I'll have to see if mounted correctly. I'm looking at mower some now. Blades were stuck, I got loose and tried blaster on them and tensioner. I'm not seeing if can be greased, no zerk found yet. I'll check manual. I'm not sure my pto lever is right. Kinda flops around. Seems to be operating pto, but not sure if locking in and working. I need to get this hood off, so can see things in front. Gotta get some drive oil in it, see if it goes or just leaks all over. I haven't decided what I'm going to buy. Guess farm store generic stuff?? Have suggestions?
 
I'll PM you, yes farm store oil is fine as far as I know there are no grease fitting on the spindles, PTO levers are on the loose side when set up right it will snap over center when engaged its easiest to set the clutch when the hood is off much easier to get at it and you want to remove it and inspect it and replace and worn or missing parts
 
Last edited:
You must log in or register to reply here.
Back
Top