Got the Power King 1620 into the shop from home

MNGB

Tractorologist
Senior Member
Member
It was a very nice day here in WC Mn today got into the 70's full sun and light wind and I figured that it was the ideal day to trailer the 1620 from home to the shop vs waiting until its 34*F overcast with a 20 mph wind out of the NW. Anyway got it to the shop removed deck blew off all the collected grass and weed clipping, tomorrow I'll power wash it remove the blades and sharpen them and grease the spindles, then put in the storage area for the winter hibernation. Then it will be time to power wash the tractor and check it over, have been thinking about pulling the cylinders off and doing a ring and valve job this fall/winter, it uses some oil and has 1415 hours on the engine.
 

Attachments

  • 20221101_144059.jpg
    20221101_144059.jpg
    432.3 KB · Views: 11
  • 20221101_144128.jpg
    20221101_144128.jpg
    330.4 KB · Views: 10
  • 20221101_144138.jpg
    20221101_144138.jpg
    329.8 KB · Views: 9
  • 20221101_161632.jpg
    20221101_161632.jpg
    174.7 KB · Views: 9
  • 20221101_161708.jpg
    20221101_161708.jpg
    136.7 KB · Views: 10
  • 20221101_161710.jpg
    20221101_161710.jpg
    180.3 KB · Views: 11
Got the deck power washed that was a job, in the past I generally set it outside turned in upside down and let it rain on it and soften up the dried on grass etc but there is no sign of rain in the next 2 weeks so I powered it off got it good, removed the blades and sharpened them actually they were in good shape just a bit of touch up so this afternoon I'll run it around to the back storage area
 
Back
Top