For Sale John Deere 420 Garden Tractor with 3-pt Power Steering 60"mower + LOTS MORE

[BTS]

John Deere 420 with just approx 967 hours, 20HP Onan 2 cylinder engine, hydrostat transmission with HI-LO (goes 12mph in high) and differential lock. This garden tractor has Power Steering, you can effortlessly steer this with one hand and the steering is really quick and tight.
I am still using this for a mower so the hours will slowly go up.

Comes with
Hydraulic 3 point hitch with draw bar
60" belly mower with hydraulic lift (new deck belt)
Cast iron wheel weights (weigh 120lbs for the set)
54" hydraulic lift snow/dirt blade for the front (new hydraulic hoses)
48" 3-pt blade
3-pt cultivator
Home built 3-pt hiller (for making raised beds and rows)
48" lawn roller
Home built 36" hydraulic lift speed mover
Rear AG tires mounted on JD rims
Grass Catcher.

New spark plugs, plug wires, air filter, hydrostat filter and hy-gard oil, new fuel filter and probably more that I'm not thinking of.

Only reason for selling is I'm buying a zero turn mower.
Asking $4.500OBO for everything OR make a offer for the tractor and what ever attachments you want (mower deck and grass catcher must go with the tractor)
I will get pictures of everything once I get it pulled out of the shop.

Thanks for looking

 

[BTS]

Finally got all the attachments out today.
Only selling the JD 420 and attachments, the rest of the tractors aren't for sell (yet).

 

[BTS]

More Pictures!

I will have new hoses on the blade in the next day or two

 

[BTS]

More Pictures.
Also tossing in a garden cart, it's in decent shape, has some welds but it should work decent (just put a new tire on it)

I don't know anything about the grass catcher, I've never had a use for one so I have never put it on. I'm guessing it's all there???

In the photos, the AG tires don't have rims, but I will get them mounted on JD yellow rims in the next day or two.

The only issue I can find with this 420 is the start will "click" when the key is turned, it doesn't always happen but it does happen once in a while. Once the key is turned again it fires right up.

 

[BTS]

 

[BTS]

 

[BTS]

Just replaced most of the wiring, no cheap crimps used, everything was soldered and heat shrink. Added on a new regulator, it's charging, got all the lights working, only thing it's missing is the headlight lens

 

[BTS]

Front blade is no longer available

 

[JDJake]

Didn't realize it till now, you do know that front blade is for a 120, 140 and 300 series? The mounting frame is too narrow for the 400, 420 and 430. Also the mounts for the 400 series are reinforced at the bottom mounting, instead of two pins there is a solid rod.

 

[BTS]

Didn't realize it till now, you do know that front blade is for a 120, 140 and 300 series? The mounting frame is too narrow for the 400, 420 and 430. Also the mounts for the 400 series are reinforced at the bottom mounting, instead of two pins there is a solid rod.

Yep figured that out lol. I'm going to put the blade on a Bolens HT23 that I am going to sell next, I already have mounts set up on the bolens so she'll be right.

 

[BTS]

$3500 for the 420, wheel weights, 3-pt, mower and grass catcher.

$4000 for everything

 

[BTS]

Just mowed for 3 hours with it today, it didn't miss a lick

 

[UncleWillie]

Nice deere. GLWS

 

[BTS]

$3200 for the 420 with 3-pt, 60" mower, bagger and wheel weights. Will sell other implements for extra $$$.

I've been mowing about 5 hours a week with it and I haven't had any issues.
I'm also shock that it only used around 3 gallons of gas when I ran it for 5 hours.