I thought I would wing one of these. I cut a lot of kindling using my wood scraps from projects. I watched a few of these on YouTube and gathered a few ideas.
I’m using some things I already have. The top ring I cut from a section of an old refrigerant tank. The four posts are some 1/4” flat stock and of coarse the bottom from an old brake rotor.
![DB3A5AB3-DFC8-4393-9E52-44C46E812A7C.jpeg DB3A5AB3-DFC8-4393-9E52-44C46E812A7C.jpeg](https://tractorfanatics.com/data/attachments/46/46331-a7936e38ed73872b47083e66511d09ee.jpg)
![132D2FDF-4432-4A6D-B427-5AD2D1ADA320.jpeg 132D2FDF-4432-4A6D-B427-5AD2D1ADA320.jpeg](https://tractorfanatics.com/data/attachments/46/46332-c78544a417d75447234a142babfeceff.jpg)
![B76F5826-413B-4CC9-9F46-79A2A2DB32A0.jpeg B76F5826-413B-4CC9-9F46-79A2A2DB32A0.jpeg](https://tractorfanatics.com/data/attachments/46/46333-13d8c28308fb2c37f570a9857ff03fa7.jpg)
The blade is also a piece of 1/4” flat stock. I trimmed one side of some 3/4” angle iron so it creates a wedge at the bottom of the blade. I’m hoping to get the blade welded up tomorrow and attached to the frame.
![A94D904A-E36D-4154-BC01-9ED810FC164B.jpeg A94D904A-E36D-4154-BC01-9ED810FC164B.jpeg](https://tractorfanatics.com/data/attachments/46/46334-3d6d2ec05ed9aa7f3123eb57657d2359.jpg)
![AD03F327-ADDA-429C-8407-22A564C01FDF.jpeg AD03F327-ADDA-429C-8407-22A564C01FDF.jpeg](https://tractorfanatics.com/data/attachments/46/46335-e7dd6e9da9a08ebe6f432413f3a87c8f.jpg)
![42E8C588-1AB1-4B9D-B2D0-1E6253471667.jpeg 42E8C588-1AB1-4B9D-B2D0-1E6253471667.jpeg](https://tractorfanatics.com/data/attachments/46/46336-34ea6603a0edb6e8e1481430651661d3.jpg)
I’m using some things I already have. The top ring I cut from a section of an old refrigerant tank. The four posts are some 1/4” flat stock and of coarse the bottom from an old brake rotor.
![DB3A5AB3-DFC8-4393-9E52-44C46E812A7C.jpeg DB3A5AB3-DFC8-4393-9E52-44C46E812A7C.jpeg](https://tractorfanatics.com/data/attachments/46/46331-a7936e38ed73872b47083e66511d09ee.jpg)
![132D2FDF-4432-4A6D-B427-5AD2D1ADA320.jpeg 132D2FDF-4432-4A6D-B427-5AD2D1ADA320.jpeg](https://tractorfanatics.com/data/attachments/46/46332-c78544a417d75447234a142babfeceff.jpg)
![B76F5826-413B-4CC9-9F46-79A2A2DB32A0.jpeg B76F5826-413B-4CC9-9F46-79A2A2DB32A0.jpeg](https://tractorfanatics.com/data/attachments/46/46333-13d8c28308fb2c37f570a9857ff03fa7.jpg)
The blade is also a piece of 1/4” flat stock. I trimmed one side of some 3/4” angle iron so it creates a wedge at the bottom of the blade. I’m hoping to get the blade welded up tomorrow and attached to the frame.
![A94D904A-E36D-4154-BC01-9ED810FC164B.jpeg A94D904A-E36D-4154-BC01-9ED810FC164B.jpeg](https://tractorfanatics.com/data/attachments/46/46334-3d6d2ec05ed9aa7f3123eb57657d2359.jpg)
![AD03F327-ADDA-429C-8407-22A564C01FDF.jpeg AD03F327-ADDA-429C-8407-22A564C01FDF.jpeg](https://tractorfanatics.com/data/attachments/46/46335-e7dd6e9da9a08ebe6f432413f3a87c8f.jpg)
![42E8C588-1AB1-4B9D-B2D0-1E6253471667.jpeg 42E8C588-1AB1-4B9D-B2D0-1E6253471667.jpeg](https://tractorfanatics.com/data/attachments/46/46336-34ea6603a0edb6e8e1481430651661d3.jpg)