Implements for my MoCraft

[CRF6179]

Bought the MoCraft and implements about 4 years ago. Finally got around to the tractor and and single bottom plow this past Winter/Spring.
Now I have started on the other implements. Most of them were A.C./Simplicity orange so I stayed with that color. I
have gotten the Middle-Buster and the cultivator finished. Now to get the disc and mower deck done.
Anyone have a source for Jacobsen #315210 mower blade-Left hand discharge?
I also need the coulter standard (z-bent shaft) that locates the coulter for my old Brinly plow. I can replicate it if anyone has the dimensions.

 

[CRF6179]

I got the disc taken apart, cleaned and painted.
It will probably go back together tomorrow, after I get some new hardware.

 

[CRF6179]

We have a Granddaughter staying with us for a few days.
I put her to work and we reassembled the disc this morning.
Loaded it onto the cart with the other implements.
The cart will make it easier to load/unload on the trailer when hauling to a show and setting up a display.

 

[CRF6179]

Next up is dismantling the mower deck.
I need to find or fabricate the belt covers.
For display/safety purposes I probably won't install the belts or blades.

 

[MFDAC]

I'm looking forward to seeing pics at a show with implements, attached to the tractor! Thanks for the pics, Rick!

DAC

 

[CRF6179]

Got the mower deck done and put the finish coat of paint on today.
I used some all thread to make a couple of attachment points on my cart .Now the plow, middle buster, cultivator and disc are securely fastened to the cart for transport and exhibition. I have a front blade for this tractor and once it is done I'll figure out how to display it and the mower deck.
Weather permitting I may attend a small local show tomorrow.

 

[CRF6179]

A couple pics of the tractor.

 

[KennyP]

Looking good Rick!

 

[Propane1]

Looking good Rick!

Ya.

Noel

 

[CRF6179]

I started on the front blade but did not get any before pictures.
I was pleasantly surprised to find that I had all the necessary parts!
While waiting on the paint to dry I got the torch out and proceeded to bend up a coulter standard for my old plow.
Thanks to member "Propane 1" I had the correct dimensions.
After heating, bending and cleaning I painted it.
While it was drying I reassembled the front blade. If anyone heard any cursing...... that was me reinstalling the springs!
Once that was done I installed the coulter standard and return the plow to the display cart.
I do have a few finished pictures. Since I don't have a second cart ready yet the blade will be displayed on the tractor.

 

[Propane1]

Looks great.

Noel

 

[CRF6179]

Had nothing to display the mower deck on. So I installed it on the tractor.
Hope to attend a show on Saturday.
Wife has 50 yr. reunion stuff going on Fri., Sat, afternoon, and Sat. evening.
Will try to work around all that.

 

[Sawdust]

Definitely a nice package to be showing. Nice job!

 

[MFDAC]

Looks, great Rick! Thanks for the pics!

DAC