I think got this one to where it will work good under better ground condition. Ground is dry, paint still on the lower part of the plow, etc. I did get it in and put the tractor up on blocks and found the plow was set to far to the right. Had to move the block on the frame of the sleeve hitch one hole which put it about right for a 10" plow. On the Medium frame Bolens the sleeve hitch block is mounted with 2 bolts to the frame and there are 5 sets of hole which it can be mounted in. I am now at the furthest to the left. Removed the coulter which helped get it in the ground some. Dirt falls into the furrow which makes the tractor with 10" tires ride higher than it should. I think I have a narrow rear tire off a tubre frame that Imight put on there for garden work, and that is all the tractor does is tiller, disk and now plow. I like those wide tiresfor tiller and disk work, less ground compaction. Will do some more reading on this. Neverr paid much attention to it before as the old plow work great behind the tube frame G10.