Vise

CRF6179

CRF6179

Goofologist
Senior Member
Member
A friend gave me this vise about 25 years ago.I
It was gerring kinda grungy sotoday I took it apart. Cleaned and reassembled. Coated the ways with paste wax. Works nice and smoothly now. I keep a small shop vac by the drill press. Hooefully it will stay cleaner.
 

Attachments

  • 20241112_161142.jpg
    20241112_161142.jpg
    202.1 KB · Views: 12
  • 20241112_161132.jpg
    20241112_161132.jpg
    223.1 KB · Views: 10
  • 20241112_161126.jpg
    20241112_161126.jpg
    168.4 KB · Views: 10
  • 20241112_135606.jpg
    20241112_135606.jpg
    303 KB · Views: 12
Cummins tools! I knew of them before Harbor Freight! Used to be a truck that would set up at the county fairgrounds once or twice a year.

Very nice vise, good job getting it freshened up, Rick. I should go steal my little shop vac back from Loree. She staked a claim to it a while back and hasn't used it at all!

DAC
 
CRF6179 said:
A friend gave me this vise about 25 years ago.I
It was gerring kinda grungy sotoday I took it apart. Cleaned and reassembled. Coated the ways with paste wax. Works nice and smoothly now. I keep a small shop vac by the drill press. Hooefully it will stay cleaner.
Click to expand...
Looks like a pretty good vice Rick.
And I too remember Cummins Tools. Some were a lot to be desired. Remember buying a set of jumbo wrenches and using them once they looked like a pretzel. Thinking back I believe the whole set of 5 or 6 wrenches was maybe $39. Quite the deal. By comparison one Snap-On wrench back then was probably $239. But I did end up with a bunch of specialized wrenches. :thumbs:
 
I have a similar 6" cross vice in my industrial drill press. It has a big variable speed system and that belt won't slip if something hangs up. Didn't hardly attempt using without a vice on it's table as holding item to be drilled by hand it could rip my arm off!
 
chieffan said:
I have a Cummings chop saw that quit on me several years ago. Think it needs brushes, which I have some place. Also have 3 extra cut off wheel for it. Either need to fix it and get it running or throw it out.
Click to expand...
If you scrap it and they are 14" wheels you can send them my way Rog! I'll pay the SpeeDee delivery charge!

I got my 1st auto darkening welding helmet at a Cummings tool sale. It was "Speedway" brand---LOL! That dang thing worked great for me until a couple years ago when I bought a Vulcan. Probably still works fine, just has a small viewing lens. Used AA batteries so that was easily replaced and had a sensitivity adjustment too. Think it was 35 bucks. Also bought a 50' Goodyear air hose and a hand crank reel for it. Both are still fine except that Goodyear hose was yellow so it is mostly grease colored now! Still have it hanging on the wall for a full compressor pressure hose. The 50' auto wind I got when I retired is regulated to 90 psi.

DAC
 
We bought a few Dayton ones at work. It’s hard to get the guys to keep the drill press area clean. It gets to be an absolute mess…

I remember tool sales when I was a kid. It wasn’t harbor freight. Maybe it was Cummins like Doug remembers. They’d set up a tent at the mall, or some other places. I have a table top drill press that came from on of those sales in like 2001. I remember my dad and I went and got stuff and me and my girlfriend at the time took my Ranger up and picked them up.
 
We bought a few Dayton ones at work. It’s hard to get the guys to keep the drill press area clean. It gets to be an absolute mess…

I remember tool sales when I was a kid. It wasn’t harbor freight. Maybe it was Cummins like Doug remembers. They’d set up a tent at the mall, or some other places. I have a table top drill press that came from on of those sales in like 2001. I remember my dad and I went and got stuff and me and my girlfriend at the time took my Ranger up and picked them up.
 
You must log in or register to reply here.
Back
Top