I was needing another set of the parts circled in the first pic to complete the 3-point on my other Sears FF20.
The fabricated parts will be used on Alice as I made the lower lift arms from 5/8" thick material and the 'stock' links are just wide enough, making a tight fit there. Here's a few pics of what I have so far. I located some 1.125" diameter rod and cut 2 pieces 1.5" long ('stock' parts are 1" long here, hoping for just a bit more lift height). I have them drilled to 9/16" right now, waiting for the 37/64" drill bit to arrive as these holes will be threaded to 5/8-18. Then I drilled the long ends to 5/8" for the pins.
More to come today on this.
The fabricated parts will be used on Alice as I made the lower lift arms from 5/8" thick material and the 'stock' links are just wide enough, making a tight fit there. Here's a few pics of what I have so far. I located some 1.125" diameter rod and cut 2 pieces 1.5" long ('stock' parts are 1" long here, hoping for just a bit more lift height). I have them drilled to 9/16" right now, waiting for the 37/64" drill bit to arrive as these holes will be threaded to 5/8-18. Then I drilled the long ends to 5/8" for the pins.
More to come today on this.