Yes, that’s it.
Painting my truck
- Thread starter Ryan313
- Start date
Yes, that’s it.
Thanks! I should also say that it needs to be washed, there is still some I the wet sanding dust on it.
I have not gotten the toolbox’s back yet, or the visor. I used the truck last night to tow a car, and it needed to Ben winched on the trailer. I put a 2” receiver on the back of the bed last summer.
Into the receiver, goes a tube with another receiver, which acts as an adapter.
I can then put the winch into the horizontal receiver. The winch is powered by a set of long jumper cables, that I cut the ends off of and installed quick connects to.
I have been wanting to add another vertical receiver in the corner, for a vise. When I was putting the winch on, I realized that I should have done it before paint, but I forgot all about it.
Into the receiver, goes a tube with another receiver, which acts as an adapter.
I can then put the winch into the horizontal receiver. The winch is powered by a set of long jumper cables, that I cut the ends off of and installed quick connects to.
I have been wanting to add another vertical receiver in the corner, for a vise. When I was putting the winch on, I realized that I should have done it before paint, but I forgot all about it.