Search results

Loved seeing Spearfish when I was out there, just love being in the mountains seeing the landscape and wildlife.

Location?

Straight pipes are ok, till you get one on a Detroit

If I have something that I'm putting in long term storage I usually run it dry, I usually use the choke when it starts to sputter, it pulls more fuel out of the bowl.

Looks like it might only be a 8 or 10hp model.

Happy Belated Birthday Doug!

Some of those older JD decks don't have grease fittings on the spindles, they used sealed bearings. Others have fittings, but they are on the underside of the deck. If you have a decent press its cheaper to rebuild them, but, you need to realize how they are assembled. Also, check your idler...

It's in the 39 and 47 mower deck parts list.

JDParts, it helps being a employee at a dealership. There's a second image in the parts catalog that list it. IIt's in the draft plate and lift straps section.

try this one, M40224.

According to JDParts, the belt should be M47043.

Sounds like the the strap that the knob is suppose to raise and lower is either missing or not hooked up right. It has a hole in it that fits around a projection on the rockshaft. There are two springs in the transmission belt system, one is on the large idler pulley at the rear, the other is...

You mean the Moline dressed as a Massey?

38" inch deck, and JD recommends letting the deck hang from the tractor, not riding on the deck wheels. The knob by your left leg under the seat sets the deck height, the deck wheels are there for anti-scalping, they should be about a finger width above a level surface. Under the the variable...

X570 use a foot pedal lift with a lift assist spring, you can get a 48" blade or 44" two stage snow blower.

30 and 31 Tractor-Mounted Tillers - PC953 0 Non Sectionalized Catalog keyboard_arrow_left INTERMEDIATE DRIVE (31 TILLER) (SERIAL NO. 100,001-111,298) [A20] - 19expand_more . 31 tiller mule drive JDParts site

No problem Doug, being a JD junkie comes in handy sometimes. Being that tiller has the adapter, you'll have to watch getting belts for it, the 31A tiller mounts a little closer to the tractor, so there are a couple of different belt lengths.

67 was the last year for the round fenders, 68 they went to the square fender. If TD is right, you have a early square fender. Which would explain the adapter bracket, I wonder if that tractor was purchased as a package deal from the dealer. Deck, blade and tiller, was a good chunk of money at...

Ok, that is a adapter bracket, which means you have a 31 tiller, which was made for the round fender 110 and 112. Deere made that bracket so you could use the early tiller on the square fender tractors. They later came out with a 31A tiller, which was a direct hookup. The bolt on hitch plate is...

And to give you a heads up, if you plan on using that deck pretty regularly, keep a eye on the double stack drive pulley. Changing the bearings in that can be a pain, just did one today at work. The pulleys are pressed fitted onto a shaft that has the bearing(s) attached. The shaft is fastened...