Search results

I don't think it is a actual Deere sprayer, they mainly had the model 5, 5A and 5B. Two had round tanks and the last was a plastic tank. Also, the wheels are larger on the JD sprayers. I'll double check at work, but I think it's homemade with a Deere sticker slapped on.

Little known fact, in some of the early 112's Deere used a limited slip version of the 2300 transmission, the 2308 or 2380, not exactly sure which at the moment

Classic green was supposedly last used on the Two Cylinder Era tractors and equipment, it might have carried over into 3010, 4010, 3020, and 4020's, but after that it should be the New Ag Green.

Deere used 2300's in the square fender 110, 112, and all the 200's, the 208 was a economy version of the 200, it doesn't have a variator. My 110 had a 8hp till it started smoking, I replaced it with a 10hp.

Loved seeing Spearfish when I was out there, just love being in the mountains seeing the landscape and wildlife.

Location?

Straight pipes are ok, till you get one on a Detroit

If I have something that I'm putting in long term storage I usually run it dry, I usually use the choke when it starts to sputter, it pulls more fuel out of the bowl.

Looks like it might only be a 8 or 10hp model.

Happy Belated Birthday Doug!

Some of those older JD decks don't have grease fittings on the spindles, they used sealed bearings. Others have fittings, but they are on the underside of the deck. If you have a decent press its cheaper to rebuild them, but, you need to realize how they are assembled. Also, check your idler...

It's in the 39 and 47 mower deck parts list.

JDParts, it helps being a employee at a dealership. There's a second image in the parts catalog that list it. IIt's in the draft plate and lift straps section.

try this one, M40224.

According to JDParts, the belt should be M47043.

Sounds like the the strap that the knob is suppose to raise and lower is either missing or not hooked up right. It has a hole in it that fits around a projection on the rockshaft. There are two springs in the transmission belt system, one is on the large idler pulley at the rear, the other is...

You mean the Moline dressed as a Massey?

38" inch deck, and JD recommends letting the deck hang from the tractor, not riding on the deck wheels. The knob by your left leg under the seat sets the deck height, the deck wheels are there for anti-scalping, they should be about a finger width above a level surface. Under the the variable...

X570 use a foot pedal lift with a lift assist spring, you can get a 48" blade or 44" two stage snow blower.

30 and 31 Tractor-Mounted Tillers - PC953 0 Non Sectionalized Catalog keyboard_arrow_left INTERMEDIATE DRIVE (31 TILLER) (SERIAL NO. 100,001-111,298) [A20] - 19expand_more . 31 tiller mule drive JDParts site