And because of inflation you’re still losing money
And more junk.
- Thread starter MFDAC
- Start date
You say that like it is a bad thing, Bill---LOL!
Made up a few short cords this morning. Needed one 6-7' long to tie to the leg of the bridge crane to get power to the hoist. Had an 8 footer there but it drags on the floor. Couple more 10-12' and also put a male end on the trouble light that was cut off the cord reel.
Pretty well built on the inside too. The screws are not color coded but the place where the wires insert is.
All of the screws are facing the same direction so they can be tightened without turning the plug.
On the second one I thought maybe these are just pretty but are junk. It felt like I was stripping out all the screws. Dawned on me to look at the little screwdriver I was using. The handle was split!
Finished cords.
DAC
The plugs look nice Doug. That’s funny you cranking on the screwdriver.
Speaking of shop space I’m about ready to do a MFDAC and start tossing stuff. I remember awhile back Doug just threw stuff away. It seams like you can’t sell anything and you sure can’t post anything because of so many crazies out there. My biggest problem is not finishing projects. I can remember that was one of several things I liked about our friend Kenny he posted from start to finish and out the door.
Speaking of shop space I’m about ready to do a MFDAC and start tossing stuff. I remember awhile back Doug just threw stuff away. It seams like you can’t sell anything and you sure can’t post anything because of so many crazies out there. My biggest problem is not finishing projects. I can remember that was one of several things I liked about our friend Kenny he posted from start to finish and out the door.
I know what your going thru with the cords. Seems like a guy never has enough 6' to 10' cords around. I even have one of those retractable cords with 3 sockets and it seems like I'd rather use a short cord.
Those look like nice cord ends.
Last edited: