More like the little engine that would!The little engine that could......
More like the little engine that would!The little engine that could......
Are the outside tiller ends original?
By this I am referring to the ends of the tiller tine shaft. Looks like there is a flat iron that come across the front of the shield and down to the ends of the tine shaft to support the outside end. I need this on mine as it would save a lot of side pressure on the gear case seals.
Thanks for posting that Tahoe. That does look like it is a factory setup. Without the outside end supported there is a lot of side pressure on the seals and gear case. Going to look into re-working mine.Hopefully these pictures will help.
View attachment 11793
View attachment 11794
View attachment 11795
there is you tube of a 13HP predator on a old Massey Harris model 33 frame running it in the field doing several tasks.
Al
Thanks for posting that Tahoe. That does look like it is a factory setup. Without the outside end supported there is a lot of side pressure on the seals and gear case. Going to look into re-working mine.
Your certainly correct about that. Once in awhile their larger engines come up on sale also.
Is that hard to lift.t.
Interesting thread.. I just purchased the 8 HP Preadator Biggest disappointment is that electric start isn't an option.
I'm putting it in a golf cart so we will use the starter generator that is common on golf carts. The next bigger motor (13 hp) is a better buy as it offers electric start and more power. This is My first Harbour Freight motor,
The local HF store doesn't stock any parts of any sort for anything so we will hope for the best.
I've seen the DuroMax 7h.p. with electric start for 229. +/-.Interesting thread.. I just purchased the 8 HP Preadator Biggest disappointment is that electric start isn't an option.
I'm putting it in a golf cart so we will use the starter generator that is common on golf carts. The next bigger motor (13 hp) is a better buy as it offers electric start and more power. This is My first Harbour Freight motor,
The local HF store doesn't stock any parts of any sort for anything so we will hope for the best.
Is that an electric to gas or just replacing the old gas motor? I've been watching a lot of conversion videos lately.
You can find all kinds of replacement or hop up parts all other the internet for the Predators at least the 6.5 and 420's, just have to do a quick search.
Looks like it fit in there real nice. Is that the 13hp ?I've not regretted the swap I had to do on my MF12G. It's been a great engine. Think it's about 3 years old doing mowing and snow plowing chores. Pretty much any Honda part will fit these engines if Predator parts can't be had. I haven't had to replace anything so far.
DAC
View attachment 11916View attachment 11917
Tillotson HU sounds familiar.... I think they used that carb on the old Jacobsen sno burst paddle style snow blowers. I remember buying a "non runner" for some silly little part for a carb like that, I wound up fixing the non runner and giving that back to the customer instead of their original machine...… everything else besides a nasty carb, was better on the "parts" machine than it was on theirs.Half the time dealers for name brand equipment here do not have th parts and need to order them.
Local Simplicity dealer is such a animal have to drive 35 miles one way to get a part today.
Screw that noise just get on the computer and order whet I need and wait a cople days and save gas money.
So why would ordering a part for a HF engine be any diffrerent?
I have a Earth Quake auger tied up right now because i can't find a screw and a tiny spring for a Tilson HU carb that is on it. they don't sell the whole carb any longer that I have found.
Also seems people who have junked out small engines like string trimmers leafe blowers and such either didn't keep the small carb or parts from them our just don't want to let them go.
Al
Looks like it fit in there real nice. Is that the 13hp ?
And you changed the air filter ? And you did something different with the muffler...????
How would you compare the difference in power between the Tecumseh and the Predator. Since they're 1 hp different.?Thanks for the comment. Yes 13 HP. It is tight and definitely wasn't a bolt-in engine swap, but it was worth all the work since I couldn't find an overbore piston for an HH120.
The Predator air cleaner was only a little piece of sponge, but the cover was too big to fit under the hood of the Massey 12G. The element is the same one as the HH120 just without the can. Now both of my tractors use the same air filter element. The base is the plastic one that came with the engine, just I cut all the top stuff off and built a stud. Cut the lid from an old Briggs can. The muffler pipe is iron and I cut that and welded it back together to go out sideways.
I did a build thread on GTT and had a lot of good help and advice, especially from DH1 who had done similar swaps on hydros. Mine is a gear with vari-speed so that was new to work out belts and such.
DAC