What are you currently working on??

[KennyP]

Here's the Polaris RZR 70 I'm working on:


Waiting for a couple bushings (Monday) to put the LH a-arm back in:


Here's the bent tie rod!

 

[Propane1]

Lookie at what I got and put on today.
75 lbs each. These are off front wheels on a Ford 3910 tractor. Fit perfect. Don’t stick out passed wheel. And can get wheel off with out removing weights. If ya had to. And would need two people, or I would.

Noel

 

[JBRamsey]

Picked up an 8N parts tractor last night. Will take what I need off of it and sell the rest to the next guy. Also blowing leaves everyday. I tilled and replanted most of my front yard and all of my back. I don’t want the leaves to sit on my new grass very long. Plus we have rain coming sometime Saturday/Sunday. Wet leaves and new grass don’t get along very well.

 

[Propane1]

Serviced the MF 12 today and took the tiller off. Stored the tiller. Used the Case and trailer to move the tiller. The hoist got in the way, as usual.

Noel

 

[KennyP]

Serviced the MF 12 today and took the tiller off. Stored the tiller. Used the Case and trailer to move the tiller. The hoist got in the way, as usual.

Noel

If that hoist keeps getting in the way, I'll take it! May have to put longer legs on the canopy though!

 

[KennyP]

Put the fork lift back on the JD 316 and hauled a load of firewood in, prepping for next week (see my post in the weather thread).

 

[Toomanytoys84]

I haven't had time to work on anything since school started back up.

FINISHED OFF the chicken coop, pen and built a huge rabbit pen with pipes leading to different hutches around the outside of the chicken pen.

Last thing I did was put a tidy tail on the back of my bike to delete the huge ugly plastic back fender.

 

[larrybl]

Finished filling in the trench we dug to install electrics in my Son's new shed.

 

[dodge trucker]

If that hoist keeps getting in the way, I'll take it! May have to put longer legs on the canopy though!

I could put one in the other stall of my garage if you're tired of yours, then I'll have 2.

 

[MFDAC]

While the snow is falling, I've been cutting stickers for an order that came in this morning and planning another shipment of truck parts today. Another shipment to Maine if he decides to go for it. May be doing snow removal tomorrow!

DAC

 

[Propane1]

Another one done today. Grease and oil, clean the deck, blow off dirt and grass. Oil and grease the differential.

Noel

 

[dodge trucker]

painting in the living room and have to sand down some additional mud in the john, defects in the walls that werent able to be seen til after they were painted...

 

[JBRamsey]

painting in the living room and have to sand down some additional mud in the john, defects in the walls that werent able to be seen til after they were painted...

I feel your pain there. I sand and prime and things still pop out with the top coat.

 

[Cat385B]

Another one done today. Grease and oil, clean the deck, blow off dirt and grass. Oil and grease the differential.

Noel

You have a hoist? When did you get that?

 

[Propane1]

Well another one on the you know what. Service to do. Got oil changed to day. Been wanting to put grease nipples in the king pins for years now. But never was done. Took the spindles out on a few occasions and greased them that way. Strange that there are no grease nipples in the king pins. And some how the lift cylinder broke. I blocked it so I could use the other cylinder for the Plow angle. Any ideas as to why it broke. Could have been partly broke all a long, before I put the angling cylinder on. Any way, did I block the lifting cylinder wrong ?
Thank fully the, you know what, will make it much easier to work on.

Noel

 

[dodge trucker]

Lift cylinder on the tractor or lift cylinder on the lift that you keep teasing the rest of everybody here with? Didn't take long to wear it out...

 

[Propane1]

I was workin on driving myself nuts today. More nutty than normal. Hehe. Not a good day. Something as simple as a 1/2” inside and 3/4“ outside bushing to fix something I’ve been wanting to fix for a few years now. Well do you think I could find that. Went to six different places. One place had a cabinet full of bushings. But they are not made in that size I wanted. Jumpins. Why do things that are simple have to be so hard at times. Some times it makes me wonder why I do things.

No pictures of the hoist either today. !!!!
See what tomorrow brings I guess. Gunna cut wood in the afternoon hopefully, if weather is reasonable. Need one more cord cut and split.

Noel

 

[KennyP]

I was workin on driving myself nuts today. More nutty than normal. Hehe. Not a good day. Something as simple as a 1/2” inside and 3/4“ outside bushing to fix something I’ve been wanting to fix for a few years now. Well do you think I could find that. Went to six different places. One place had a cabinet full of bushings. But they are not made in that size I wanted. Jumpins. Why do things that are simple have to be so hard at times. Some times it makes me wonder why I do things.

No pictures of the hoist either today. !!!!
See what tomorrow brings I guess. Gunna cut wood in the afternoon hopefully, if weather is reasonable. Need one more cord cut and split.

Noel

Gonna use the hoist to split it?

 

[dodge trucker]

He won't be able to, remember he wore it out a few posts ago.

 

[Propane1]

Hehe. I knew I’d get it. That’s the fun about posting stuff. Keeps people entertained. Hehe.

Noel