And more junk.

On it's last day here the old refrigerator started running quietly again---LOL! Sorry, no second chances! To scrap you go!
Got all the food packed into coolers and cooler bags. We have lots of those blue ice things so hopefully things will stay chilled until morning.

Got our old Coleman cooler cleaned up and put all the ice from the old icemaker into the plastic tub in it. Loaded it up. That thing got pretty heavy fast. I forgot to fill the ice bottle that is in it but needed the room anyway.
IMG_1873.jpg

Put all the stuff out on the back steps. The frozen stuff all fit into a small chest freezer after I rearranged and bagged (grey bag) some older stuff to put outside. I'm pretty sure that stuff needs to go in the garbage but it's cold enough to keep it frozen outside until Loree decides. Put it all outside for the day.
IMG_1876.jpg

Then I pulled the old fridge out to unplug and disconnect the waterline. Installers don't do the water line. "Insurance" reasons they said. I checked the waterline from the RO system and there was no shutoff on that line. I had to shut down the entire system to disconnect from the old fridge. The RO installers did the plumbing 18 years ago. I have an inventory of 1/4" and 3/8" tubing and fittings in case I need them for the RO and luckily had a 3/8" valve. Clipped the line and installed it behind the fridge.
IMG_1875.jpg

IMG_1874.jpg

Sanded the bottom of that cabinet for awhile and the new belt on the Craftsman sander wadded up. Decided to heck with it, no one will see that! That is the hardest to cut and sand particle board I have ever seen!

Sat down to have lunch at 2:30 and got a call that the delivery guys were on the way, 2 hours early! I was fine with that!
They got the old one out and brought in the new one. They had to remove the front door and the screen door closer to get it in. They pulled the hinge pins on the door.

They got it in position and then I had to hook up the water line and open the valve. No leaks anywhere thankfully. Rolled it into place and by 3:30 they were leaving. Need to let it chill down well before food can go back in. I waited until dark and brought in the refrigerated stuff to keep it from freezing outside. It was pretty nice in the sun today, but the north side of the house in the shade never got over 26F.
IMG_1878.jpg

It was only 26 bucks for them to haul away the old fridge! Dirt cheap in my opinion! They did more labor than that hauling that thing out and up the ramp into the truck! Yup just a ramp on the truck, no lift!

DAC
 
Last edited:
On it's last day here the old refrigerator started running quietly again---LOL! Sorry, no second chances! To scrap you go!
Got all the food packed into coolers and cooler bags. We have lots of those blue ice things so hopefully things will stay chilled until morning.

Got our old Coleman cooler cleaned up and put all the ice from the old icemaker into the plastic tub in it. Loaded it up. That thing got pretty heavy fast. I forgot to fill the ice bottle that is in it but needed the room anyway.
View attachment 89046

Put all the stuff out on the back steps. The frozen stuff all fit into a small chest freezer after I rearranged and bagged (grey bag) some older stuff to put outside. I'm pretty sure that stuff needs to go in the garbage but it's cold enough to keep it frozen outside until Loree decides. Put it all outside for the day.
View attachment 89049

Then I pulled the old fridge out to unplug and disconnect the waterline. Installers don't do the water line. "Insurance" reasons they said. I checked the waterline from the RO system and there was no shutoff on that line. I had to shut down the entire system to disconnect from the old fridge. The RO installers did the plumbing 18 years ago. I have an inventory of 1/4" and 3/8" tubing and fittings in case I need them for the RO and luckily had a 3/8" valve. Clipped the line and installed it behind the fridge.
View attachment 89048

View attachment 89047

Sanded the bottom of that cabinet for awhile and the new belt on the Craftsman sander wadded up. Decided to heck with it, no one will see that! That is the hardest to cut and sand particle board I have ever seen!

Sat down to have lunch at 2:30 and got a call that the delivery guys were on the way, 2 hours early! I was fine with that!
They got the old one out and brought in the new one. They had to remove the front door and the screen door closer to get it in. They pulled the hinge pins on the door.

They got it in position and then I had to hook up the water line and open the valve. No leaks anywhere thankfully. Rolled it into place and by 3:30 they were leaving. Need to let it chill down well before food can go back in. I waited until dark and brought in the refrigerated stuff to keep it from freezing outside. It was pretty nice in the sun today, but the north side of the house in the shade never got over 26F.
View attachment 89050

It was only 26 bucks for them to haul away the old fridge! Dirt cheap in my opinion! They did more labor than that hauling that thing out and up the ramp into the truck! Yup just a ramp on the truck, no lift!

DAC
Looks good, DAC. I helped my brother take his old refrigerator out and bring in his new one. What a pain to get the new one in. It was bigger and had to remove 2 doors on the house, one for the porch entry and the other up a couple steps going into the house. It still wouldn't fit so pulled all of the fridge/freezer doors off and squeaked it in. These old houses weren't built for this new oversized stuff.
 
Our last old one start to give a clunk when it shut down. Service guy said it was the compressor mount had broken, not all that common. Got a different one line u for delivery. Took the old on out and later I brought it up to the neighbors to put in his shop for the cattle meds and anything else he wanted to put in it. Far as I know it is still clunking and that was 3 years ago.

Doug, no ice and water in the door? That was a requirement for the last 3 we have had.
 
Looks good, DAC. I helped my brother take his old refrigerator out and bring in his new one. What a pain to get the new one in. It was bigger and had to remove 2 doors on the house, one for the porch entry and the other up a couple steps going into the house. It still wouldn't fit so pulled all of the fridge/freezer doors off and squeaked it in. These old houses weren't built for this new oversized stuff.
You guys just barely made it work, CJet! Those installers had a tough time on the front steps since it only has a 4'x4' landing. Making the turn was worse than getting it in the house. Front door is a 3'-0 opening. I can't imagine how some of the gigantic refrigerators we looked at can even be brought in through normal doors! This one is only 24 cu ft!

DAC
 
Our last old one start to give a clunk when it shut down. Service guy said it was the compressor mount had broken, not all that common. Got a different one line u for delivery. Took the old on out and later I brought it up to the neighbors to put in his shop for the cattle meds and anything else he wanted to put in it. Far as I know it is still clunking and that was 3 years ago.

Doug, no ice and water in the door? That was a requirement for the last 3 we have had.
No water dispenser and the ice maker dumps into a tub in the freezer, Chris. We get the water from the RO faucet on the sink anyway, and Loree wanted that bottom freezer VS a side or top one. Can't make the ice go uphill to dump in a mug, so we will have to scoop it.

DAC
 
I don’t like water or ice in the door either. Ice maker in the freezer and water comes from bottles.
I liked the ice dispenser on the old fridge, Aaron, but the water dispenser was very slow. Much faster to just walk 3 steps to the sink and use the RO faucet. We really like the reverse osmosis water for drinking. Our well water was just fine going through that system, and now that we are on a water system the filter and membrane life should be much longer.

DAC
 
Doug, new fridge looks nice but you have me worried now. The fridge I have now is the same one you took out just badged Westinghouse (mad by whirlpool.
I bought it new in 09 when I moved into current house. Myself and my son had a hell of a time getting it in the house. He still gives me a bad time about buying such a big fridge. In my defense it was on clearance at Menards.
 
Doug, new fridge looks nice but you have me worried now. The fridge I have now is the same one you took out just badged Westinghouse (mad by whirlpool.
I bought it new in 09 when I moved into current house. Myself and my son had a hell of a time getting it in the house. He still gives me a bad time about buying such a big fridge. In my defense it was on clearance at Menards.
Yup, Ted, the old one was a Whirlpool. It was almost 19 years old and came with this trailer house when we bought it new in 2006. I have no complaints about it at all, just the compressor got real noisy. Gonna die soon I'm sure. I'm afraid of this one a bit since it is an LG. Not real fond of their products but it had a 10 year warranty on the "sealed components", meaning the refrigeration system at least. It would fit in the hole besides having to butcher the cabinet above so we pretty much had to go with it or go smaller. I'm not going to remodel the kitchen for appliances at my age, and then wonder if they will fit through the door!

DAC
 
We really like the reverse osmosis water for drinking.
When I installed our RO system it was plumbed to the refrigerator and the kitchen sink like yours. It would be hard to go back to drinking straight rural water again. We both really like the RO water. Ours is a Water General and was reasonably priced for what they do for the water. If something happened to this one it would get replaced with another one in short order.
 
We are on rural water which is the same as city water. Good water for sure but the filter in the fridge cleans it a bit more and make it taste that much better. Same with the ice, We get a strong stream of water from the door supply. Slowly changing our water line from the 1/2" grey PEX type to the 1/'2" OVC. With PEX the size is reduced down rom1/2" to 5/16 at each fitting that is installed inside the line. With PVC the fitting all go on the outside of the pipe and don't; alter or restrict the size of the line.

We also have a Culligan water softener for the house water. Lease del where thy provide everything ro$24/mo.Notice it the most innthe clothes. Come out much softer and cleaner and the use of soap is a lot less. Savings in soap products used pays for the lease of the equipment.
 
When I installed our RO system it was plumbed to the refrigerator and the kitchen sink like yours. It would be hard to go back to drinking straight rural water again. We both really like the RO water. Ours is a Water General and was reasonably priced for what they do for the water. If something happened to this one it would get replaced with another one in short order.
Yeah Chris we are spoiled by the RO system. It was a necessity with the well but will continue using it with the water system. Will be ordering filters for it after the first of the year.

We are on rural water which is the same as city water. Good water for sure but the filter in the fridge cleans it a bit more and make it taste that much better. Same with the ice, We get a strong stream of water from the door supply. Slowly changing our water line from the 1/2" grey PEX type to the 1/'2" OVC. With PEX the size is reduced down rom1/2" to 5/16 at each fitting that is installed inside the line. With PVC the fitting all go on the outside of the pipe and don't; alter or restrict the size of the line.

We also have a Culligan water softener for the house water. Lease del where thy provide everything ro$24/mo.Notice it the most innthe clothes. Come out much softer and cleaner and the use of soap is a lot less. Savings in soap products used pays for the lease of the equipment.
Our RO and water softener are "Watertree" brand. We own the softener. They were installed by the Watertree store in town that at one time was the Culligan store. Seems like good quality equipment. Both will be 19 years old in May.

Loaded the food into the new refrigerator this morning. Figured out I can monitor it through wifi so I figured out how to download the app and can look to see if it is working properly from anywhere.

Then I did my laundry and worked on the floor in the new closet. Had to level off a couple of areas where holes were patched with osb where there was plumbing from the old shower. That should let the Engineered vinyl flooring lay down nicely. Just a 3'x4' area. Might not get to the flooring until Friday.

DAC
 
We went from 75 grain hardness to 15! Big savings on salt now, thankfully! The fridge installer said if we use the RO system the fridge filter may never have to be changed.

It sure don't take me long to get sore working on my knees and trying to get up from that position anymore! Worked on the new closet flooring today for about 2-1/2 hours. I never cut or laid that vinyl flooring before, but that part was pretty easy. Just the position. I had to sand and vacuum the patches in the original floor so there were no lumps then I started at the door and worked inward. Had to cut the inside door casing with the multi tool blade and a couple of cove corners on that end too. 6 pieces fit perfectly. Cut and installed a transition strip too. Still have to trim it out with the 1" "baseboard" I got at Menards. Then it will be deciding what kind of shelving Loree will want in there. This is the space where our old shower was in the master bedroom bath. Didn't get a pic before the flooring went down.

IMG_1882.jpg

IMG_1883.jpg
 
When out shower conversion is done will put new flooring down also. Think I will lay 1/8" hardboard to get a nice smooth surface and put down the 2' square self-stick vinyl squares. I used carpet inside the hunting blind and they really lay nice and stay down good, even with a chair rolling across it in colder weather.
 
Back
Top